| |
| | Post Date: 2006-9-16 Expiry date: 6 months |
| |
| Short Message |
Tel:86-0318-7595788
Fax:86-0318-7582222
MSN:zhangyujing123 |
| Detail |
YJC03/80-4 Type Auto-crossing Chain Link Fence Machine is used in control-auto of PLC. Knife winding of shape is moving used in active video timing.
Main parameter of full automatic chain link machine
1.Width scope of weaving: 1-4m
Wire scope of weaving: 2-4mm
Mesh scope of weaving: 30-100mm
With 3 sets of mesh model at buyer's requirements
2.The machine is controlled by PLC automatic controller, so only one person is needed to operate it
3.The output per minute: for example: If the mesh is 50x50mm, width: 2m, the output will be: 1M2 min.
4.Suitable wire to the machine: the tensile scope of the wire 300-500N/M2
5.Use compacting machine to make it into rolls
6.Total power of equipment 11kw
7.Weight of equipment: 4200kg
8.Outside size: main machine: 6700x1430x1800mm
Specification diameter of wire
Mesh pitch(mm)
30 40 50 60 70 80 100
wire Diameter (mm)
2.0-2.5 2.0-2.5 2.0-3.0 2.0-4.0 2.0-4.0 2.0-4.0 2.0-4.0
|
|
|
